You have no items in your shopping cart.
Product Description
FEATURES:
* Available in black quilt only
SPECIFICATIONS:
- Exterior - 19" long x 16.5" wide
- Inside - 14" long x 12" wide
- Back - top to bottom is 6.5"
- Front - top to bottom is 6.25"
- Sides - top to bottom is10.25"
General Information - The Pet Rider Seat is designed to mount on the rear or front carrier of your bicycle. If your bicycle does not have one, you can find them at your local bicycle shop or various discount chain stores in their accessory section. The Pet Rider Seat weighs about 6 pounds and can carry pets weighing up to 24 lbs.
Instructions: Place Pet Rider Seat on the bicycle carrier and position it at or under the rider's seat for rear mounting or against the handle bar for front mounting. A strap on the Pet Rider Seat goes through the carrier and fastens to the seat or handle bar post and should be tightened securely with the adjustment on the strap. The two side straps are designed to provide side-to-side stability and need to be attached on both sides of the bicycle frame or fork, keeping them clear of the chain or wheels. Use the supplied self-adhesive wrap to protect paint. Wrap the adhesive around the frame or fork and place the side strap between the self-adhesive wrap and the clamp provided. Tighten the clamp and then connect the strap to the quick-release buckle and adjust any looseness to maintain equal side-to-side tension. After tightening the side straps, work the loose strap ends in the holder provided so the loose end does not flap during use. When using Pet Rider Seat, your pet should be in a harness. The Control Strap provided on the Pet Rider Seat goes through the pet harness and around the strap holding the seat to the bicycle post. Tighten the strap so your pet is secure and cannot leave the seat. To start using the Pet Rider Seat, secure pet and slowly walk the bicycle allowing your pet to become accustomed. When your pet feels comfortable, start your ride.
Washing Instructions: To wash the cover, remove the post strap from the grommets by taking off the strap's adjustable end and slip the cover off. Wash in warm water, NO bleach and dry on LOW heat, removing promptly.
* Available in black quilt only
SPECIFICATIONS:
- Exterior - 19" long x 16.5" wide
- Inside - 14" long x 12" wide
- Back - top to bottom is 6.5"
- Front - top to bottom is 6.25"
- Sides - top to bottom is10.25"
General Information - The Pet Rider Seat is designed to mount on the rear or front carrier of your bicycle. If your bicycle does not have one, you can find them at your local bicycle shop or various discount chain stores in their accessory section. The Pet Rider Seat weighs about 6 pounds and can carry pets weighing up to 24 lbs.
Instructions: Place Pet Rider Seat on the bicycle carrier and position it at or under the rider's seat for rear mounting or against the handle bar for front mounting. A strap on the Pet Rider Seat goes through the carrier and fastens to the seat or handle bar post and should be tightened securely with the adjustment on the strap. The two side straps are designed to provide side-to-side stability and need to be attached on both sides of the bicycle frame or fork, keeping them clear of the chain or wheels. Use the supplied self-adhesive wrap to protect paint. Wrap the adhesive around the frame or fork and place the side strap between the self-adhesive wrap and the clamp provided. Tighten the clamp and then connect the strap to the quick-release buckle and adjust any looseness to maintain equal side-to-side tension. After tightening the side straps, work the loose strap ends in the holder provided so the loose end does not flap during use. When using Pet Rider Seat, your pet should be in a harness. The Control Strap provided on the Pet Rider Seat goes through the pet harness and around the strap holding the seat to the bicycle post. Tighten the strap so your pet is secure and cannot leave the seat. To start using the Pet Rider Seat, secure pet and slowly walk the bicycle allowing your pet to become accustomed. When your pet feels comfortable, start your ride.
Washing Instructions: To wash the cover, remove the post strap from the grommets by taking off the strap's adjustable end and slip the cover off. Wash in warm water, NO bleach and dry on LOW heat, removing promptly.
Product Tags
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.
